NEW SERIES: WEIRD WEAPONS

 Hello ladies and gents this is the Viking telling you that today we are talking about

THE VESPA 150 TAP

File:Vespa militare2.JPG

The Vespa 150 TAP was an anti-tank scooter made in the 1950s from a Vespa scooter for use with French paratroops (troupes aéroportées, TAP). Introduced in 1956 and updated in 1959, the scooter was produced by Ateliers de Construction de Motocycles et Automobiles (ACMA), the licensed assembler of Vespas in France at the time. Modifications from the civilian Vespa included a reinforced frame and a three-inch recoilless rifle mounted to the scooter.

The 150 TAPs mounted a M20 75 mm recoilless rifle, a U.S.-made light anti-armour weapon. It was very light in comparison to a standard 75 mm cannon but was still able to penetrate 100 mm of armour with its HEAT warhead. The recoil was counteracted by venting propellant gases out the rear of the weapon which eliminated the need for a mechanical recoil system or heavy mount.

The scooters would be parachute-dropped in pairs, accompanied by a two-man team. The gun was carried on one scooter, while the ammunition was loaded on the other. Due to the lack of any kind of aiming devices the recoilless rifle was never designed to be fired from the scooter; the gun was mounted on a M1917 Browning machine gun tripod, which was also carried by the scooter, before being fired. However, in an emergency it could be fired while in the frame, and while the scooter was moving.

The "Bazooka Vespa" was relatively cheap: Vespas cost roughly US$500 at the time, and the M20s were plentiful. 600 of them were produced, between 1956 and 1959. It had a cart, and also came with two cans of fuel. 

The scooter themselves were original civilian produced VB1T models, 150 cc capacity engine. The engine was two stroke, top speed of 60 km/h, enough speed to ram any vehicles if needed in an emergency, or move the user from the drop site to the area where the paratrooper was needed.

and as always have a chilled day from the Viking

Comments